Electrically Heated
4 to 6 GPH
85 Gallon Capacity

The Model 85E is an electrically heated wastewater evaporator.  It comes in two models, The Model 85E carbon steel version and the Model 85E-SS 316L Stainless Steel version.  Typical applications include minimizing wastewater from machining and grinding, parts washing fluids, compressor condensate, mop waters, paint & ink wash-ups, photographic solutions, and many other water based waste streams.  Installation is simple consisting of an electrical hookup and a 6" diameter vent stack. The unit can be filled in three different ways: (1) Plumb the feed source into the supplied 2" coupling; (2) Remove the lid and manually fill the unit; or (3) Use the optional 70 GPM fill pump.  An auto-fill option is also available.  The auto-fill and fill pump options include a cleanout valve for removing concentrated liquid waste from the evaporator.  After an initial heat up time of approximately one hour, the Model 85E will evaporate up to 4 to 6 gallons per hour of water.  The unit shuts down automatically via a low level control.  A high temperature thermostat provides a secondary shutdown system.  When a cycle is completed, the liquid waste material can either be drained via a 2" step down drain or pumped out.  To facilitate solids cleanout the tank cover is removable, the tank height is a convenient 30" waist high and the floor is an obstruction free 3/8" thick plate.

FEATURES & BENEFITS

  Heavy Duty 12 Gauge Tank, Covers, & Stack (Carbon or 316L Stainless Steel)
  3/8" Plate Floor Heat Exchanger (Carbon or 316L Stainless Steel
  Automatic Shutoffs (Low Level Control & High Temperature Shutdown) for unattended operation
  Simple one button ON/OFF operation
  Removable Lid and obstruction free tank floor for fast and easy Cleanout
  Fully Insulated Tank
  Variable weir oil skimmer standard on all units.
  Power exhaust allow venting to outdoors
  Quality polyurethane finish
  Tank Top at convenient 32" height to facilitate cleanout
  Electrical Test Lab Approval
  Easily installed requiring only a vent stack and electrical hookup
  Industry Standardized Components.  Most parts are available from major industrial supply houses.  You are not held hostage by high mark up on "captive" parts only available by the original equipment manufacturer.
  Optional 70 GPM Self Priming Feed Pump
  Optional Auto Fill System
  Optional Cleanout Pump System
  Optional 440V Power Available
  One Year Warranty on Parts & Workmanship

Pricing

Part No.

Credit Card Purchases Welcome

Delivery: Normally In Stock     FOB: Santa Fe Springs, CA
Payment Terms: 1/3 w/Order, Balance Due Net 30 Days with Approved Credit
Pricing and specifications subject to change without notice.

Copyright © 2000 by MTA Technical Sales.  All rights reserved.  EMC, Water Eater, and Jetsink are registered trademarks of Equipment Manufacturing Corporation.  Equipment Manufacturing Corporation reserves the right to make product specification changes and price changes without notice. Industrial wastewater treatment equipment, waste water evaporation, wastewater evaporator, water evaporation, wastewater treatment, part washer, aqueous part washer, industrial part washer, automotive part washer, automatic part washer, evaporator, machine tool coolant system, coolant recycling, coolant filter, oil in coolant, coolant recovery, coolant cleaner, coolant, waste water treatment

Previous     Next